Chicco Corso - How to Use the Safety Harness; To Adjust the Shoulder

27
17B
How to Use the Safety Harness
17B. To adjust the Shoulder
Harness to another height position,
locate the D-ring on the back of
the seat as shown. Slide the D-ring
through opening on the seat back.
Then pull through the opening on
the seat pad. Re-insert the D-ring
into the correct height position,
and repeat for the other side.
Always use the same height
position for both straps. Depending
on Shoulder Harness height
position, D-ring may be located
below visible opening in seat back.
Seat Front