15
damaged or missing parts.
• WARNING: Always use all parts
needed for each conguration of
use.
• Make sure that the adult using the
product knows how it works, in ac-
cordance with manufacturer's in-
structions.
• WARNING: The product is ready for
use only when the locking mecha-
nisms are engaged. Make sure they
are securely xed before use.
• All operations for opening, adjust-
ing, fastening and positioning the
product must be carried out by an
adult.
• Do not use the product without
the frame.
• Keep the fastening straps out of
reach of children.
• Infants can suocate on soft bed-
ding. Avoid placing pillows or sim-
ilar items under newborn babies for
additional comfort during sleep.
• Use the crib in “Side sleeping con-
guration (fastened to the bed)”
only with beds of the size indicted
in the reference gure at the begin-
ning of the manual.
• Do not leave anything inside the
product that might reduce its
depth.
• To prevent the child being trapped,
do not place the crib close to walls
of obstacles.
• Do not leave any small objects in-
side the product that might be
swallowed.
• Do not make adjustments to the
product when the children are in it.
• Do not move the product when
the children are inside.
• Do not use the product with more
than two children at a time.
• Prolonged exposure to sunlight
may cause the colour of the prod-
uct to vary in tone. After prolonged
exposure of the product to high
temperatures, wait a few minutes
prior to putting your children in it.
• WARNING: During use, make sure
that the bedsheets, blankets, etc.
do not interfere with the crib’s
space.
• Keep the product out of reach of
children when it is not in use.
COMPONENTS
A. Leg support
A1. Height adjustment button
A2. Height indicator
A3. Foldable foot release button (x2)
A4. Bottom bar slots
A5. Housing for top part of the crib
A6. Crib base connector housing
A7. Lower frame release lever
A8. Non-slip feet
B. Foldable non-slip feet (x2)
C. Bottom bar
D. Front crib structure
D1. Fabric
D1.1. Front vertical zippers
D1.2. Upper hinge
D1.3. Central barrier zipper
D1.4. Fabric attachment buttons (x7)
D1.5. Straps with snap buttons
D2. Upper structure/leg support fasteners
D2.1. Upper structure release buttons
D3. Side panel opening button
D4. Crib base connectors
D5. Crib base
D5.1. Grey buckle for belt anchoring
D5.2. Lower structure/leg support fasteners
D5.3. Connectors for central partition
D6. Upper arms
D7. Upper tube
D8. Central partition
E. Fastening straps
E1. Grey prong
E2. Red buckle
E3. Red prong
To Next Page
Loading...
