8
INSTRUCTIONS FOR USE
WARNING: BEFORE USE, REMOVE
AND DISPOSE OF ALL PLASTIC
BAGS AND PACKAGING MATERIALS
AND KEEP THEM OUT OF REACH OF
CHILDREN.
COMPONENTS/PARTS
A - Toy bar structure
B - Toy bar fastening hooks
C - Toy bar fastening tabs
D - Fastening safety stop
E - Highchair joints
F - Toy bar joints
G - Toy bar fabric hanging toys
H - Plastic rings
I - Rattle
J - Fabric reducer cushion
TOY BAR USAGE
WARNINGS
• WARNING: Never use the toy bar to
lift the highchair.
• Do not attach any strings to extend
the fastening systems of the toy bar’s
hanging toys and do not make knots/
loops: This could lead to running knots
from accidentally forming which could
lead to strangulation. This toy must
only be used under adult supervision.
• Check the toy regularly for signs of
wear and damage and to ensure that
it is assembled correctly. In presence
of damage in any part of the product,
do not use and keep it out of children’s
reach.
• The toy bar shall only be used together
with the highchair Polly Progres5.
• The toy bar must be reclined in order
to keep the toys at an adequate dis-
tance from the face of the child, and
to create a correct interaction when
playing.
Toy bar tting
1. Attach the structure of the toy bar A
to the highchair, placing the xing
hooks B on the side joints of the high-
chair E (Fig. 1).
2. To complete the tting, close the fas-
tening tabs C (Fig. 2), pushing them
until hearing a click to conrm the
correct engagement (Fig. 3A). In case
of wrong tting (Fig. 3B) repeat the
operation and check that the stop D
is correctly engaged. The (Fig. 4) in-
dicates that the tting was properly
completed.
3. To remove the toy bar, act on the safe-
ty stop D and at the same time turn
the tabs C outwards (Fig. 8-9).
Reclining the toy bar
Using the joints F, the toy bar can be ad-
justed to 3 dierent reclining levels (Fig.
5-6-7) depending on the seat position.
IMPORTANT WARNING
WARNING! RETAIN FOR FUTURE
REFERENCE.
To Next Page
Loading...
Need help?
General
