Chicco TEDDY - App Control and Customization; Home Screen Functions

15
device at a time. If connection fails, make sure
that there is no other connected device nearby to
which Chicco Teddy has already been associated.
If necessary, disconnect the Chicco Teddy closing
the app as required by the relevant operating
system or disable Chicco Teddy as described in
paragraph 2.2.5.
Proceed again with association and create a new
Chicco Teddy prole only once the tag has been de-
leted from the app as illustrated in paragraph 2.2.6.
In the case of failed association, disable and enable
the Bluetooth module of the device again and re-
peat the entire procedure in the same order shown
in this paragraph.
2.2.4 Home screen
2.2.4.1 «I’m looking for you»
Pressing the control
(I’m looking for you)
next to the name associated with one or more
Chicco Teddy units, the icon will appear next
to the selected Chicco Teddy for the duration
of the acoustic alarm that is activated on Chicco
Teddy (10 sec).
It will no longer be possible to enable this function
if the connection between Chicco Teddy and the
device is lost; in this case, the icon of the “I’m look-
ing for you” command turns grey.
Tommy
Disable
DELETE PROFILE
SHOOT PHOTO
GALLERY
Audio Vibration
Prole image
Colour
Alert distance
Alert mode
Yellow Red
SAVE PROFILE
PREVIEW