To Next PageTo Next Page
Need help?Do you have a question about the Chicco LullaGo and is the answer not in the manual?
General| Foldable | Yes |
|---|---|
| Top material | Cotton |
| Product color | Silver |
| Number of legs | 4 leg(s) |
| Maximum load weight | 9 kg |
| Recommended age (min) | 0 month(s) |
Weight and Dimensions| Depth | 76 mm |
|---|---|
| Width | 92 mm |
| Height | 50 mm |
| Weight | 7000 g |
| Folded depth | 17.5 mm |
| Folded width | 57.5 mm |
| Folded height | 52 mm |
Infants have suffocated in gaps and on soft bedding. Use only provided pad and avoid cords.
Stop use when infant pushes up or reaches 20lbs (9kg) to prevent falls.
Place healthy infants on their back to sleep to reduce the risk of SIDS.
Check for loose parts, damage, or wear. Contact Chicco for replacement parts.
The main structure of the bassinet.
The pad for the bassinet.
The four legs that support the bassinet.
The bag for transporting the bassinet.
Stand the bassinet frame upright and swing the ends outward and upward.
Attach legs by inserting them into the frame, ensuring release buttons face each other and snap buttons lock.
Insert the mattress pad into the bassinet bottom, ensuring zippers face downwards.
Press the release button on each leg and pull the leg off the bassinet end to detach.
Remove mattress, then press hinge release buttons to fold the bassinet ends down.
Place the bassinet frame, mattress pad, and legs into the tote bag for transport.
Remove padding by unzipping the cover. Re-insert with the board side aligned with the zipper.
Pull the plastic tab from the metal bracket on the hinge to detach the bassinet fabric.
Undo hook and loop fastener to locate and remove the center board from the fabric.
Press snap buttons on hinges and pull up to remove them from the bassinet frame.
Lay frame on side, unzip fabric on each end, and pull out the frame arms.
Attach hinges to frame arms, ensuring the metal bracket faces inward.
Align hinge keyway with frame arm pin, insert, and ensure snap buttons lock for secure attachment.
Slide plastic tabs into metal brackets and secure the center board with the hook and loop fastener.
Fabric covers are removable and washable. Follow care label instructions; avoid harsh chemicals.
Wipe plastic parts with a damp cloth, dry metal parts to prevent rust. Do not immerse floor boards.
Contact Chicco for questions, comments, or missing parts via phone, email, or website.
