Chicco ZEST - High Chair Assembly; Step 1: Attach Top and Bottom Legs; Step 2: Attach Rear Legs to Seat

10 11
5
5. Attach the T-Bar (D) to the
Seat Frame, as shown. The
T-Bar will click into place on
both sides of the Seat. Pull up
on the T-Bar to make sure it is
securely attached.
"CLICK"
Adjusting Safety Harness
6. The High Chair has a 5-point
safety harness. The Shoulder
Strap Connector is designed to
break away from the Waist Clip
when not secured in the Crotch
Strap Buckle.
Make sure the Shoulder Strap
Connector is in the correct
position, as shown. Slide the
Shoulder Strap Connector onto
the Waist Strap Clip and repeat
for the other side.
Then slide both Waist Clips
into the Crotch Strap Buckle
as shown. Pull on both sides to
make sure the Clips are secured
to the Buckle.
6
Prevent serious injury or death from sliding out, falls, or tipping over.
Always secure child in the restraint. Never leave child unattended.
The tray is not designed to hold the child in the chair.
WARNING
Assembly