Need help?Do you have a question about the Chicco ZEST and is the answer not in the manual?
General| Type | High Chair |
|---|---|
| Maximum Child Weight | 15 kg |
| Harness | Yes |
| Tray | Yes |
| Foldable | Yes |
| Dishwasher Safe Tray | Yes |
| Frame Material | Steel |
| Age Suitability | 6 - 36 months |
Identifies the Top Legs (A) and Bottom Legs (B) included with the product.
Identifies the Seat (C) and T-Bar (D) components of the high chair.
Identifies the Tray (E) component for the high chair.
Attaches the 4 Top Leg sections to the 4 Bottom Leg sections securely.
Attaches 2 Legs to the rear attachment openings on the High Chair Seat.
Attaches 2 Legs to the front attachment openings on the High Chair Seat.
Extends the rear legs by pressing buttons on the extender hub and locking them.
Attaches the T-Bar (D) to the Seat Frame on both sides.
Connects the Shoulder Strap Connectors to the Waist Strap Clips.
Releases the safety harness by pressing the Crotch Strap Buckle.
Adjusts the length of shoulder and waist straps using buckles.
Attaches the Tray (E) by pulling out Tray Locks and pressing down until it clicks.
Adjusts the Tray to 3 different positions by squeezing Tray Locks.
Stores the Tray on the back of the seat by lining up Tray Locks.
Folds the rear legs by pressing buttons on the extender hub and pulling them inward.
Removes the Bottom Legs by pushing pins and sliding them apart.
Removes the Tray by squeezing Tray Locks on each side.
Removes the T-Bar by pulling out on both side tabs.
Removes the Bottom Legs by pushing in on pins and sliding them apart.
Wipe plastic parts with a damp cloth; dry metal parts to prevent rust.
Check for loose parts, replace as needed, and keep product dry.
Provides contact information for questions, comments, or missing parts.
To Next Page