14 15
Assembly
9
9. To attach the Tray (E) pull out
on both Tray Locks
underneath the Tray. Place it
on top of the T-Bar. Press down
until it clicks into one of the 3
Tray Lock positions. Make sure
that the Tray is in the same Tray
Lock position on both sides.
Always check that the Tray is
securely attached by pulling up
on it.
Tray Use
10
10. The Tray can be adjusted
to 3 different positions.
To adjust the Tray squeeze both
Tray Locks on each side of the
Tray and slide it forward or
backwards.
The Tray can be removed by
squeezing both Tray Locks on
each side of the Tray and
lifting up.
To Next Page
Loading...
