What to do if my Chigo Air Conditioner has high pressure protection?
If your Chigo Air Conditioner is showing a high pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What to do if my Chigo COU-18CR1 has low pressure protection?
If your Chigo Air Conditioner is showing a low pressure protection error, check the system pressure and resolve any issues affecting those pressure levels.
What to do if my Chigo COU-18CR1 Air Conditioner outdoor unit has over-current protection?
If your Chigo Air Conditioner's outdoor unit is experiencing over-current protection, assess the outdoor unit for electrical issues and repair as required.
What to do if my Chigo COU-18CR1 has outdoor protection?
If your Chigo Air Conditioner is experiencing outdoor protection issues, check the outdoor unit for proper operation and reset it if necessary.
What to do if my Chigo COU-18CR1 outdoor unit exhaust temperature is over-high?
If your Chigo Air Conditioner's outdoor unit exhaust temperature is too high, inspect the outdoor unit for airflow issues and correct any airflow obstructions.
What to do if my Chigo COU-18CR1 Air Conditioner has three-phase electricity phase sequence failure?
If your Chigo Air Conditioner reports a three-phase electricity phase sequence failure, check the phase sequence of the electrical supply.
What to do if my Chigo COU-18CR1 has ambient temperature sensor (T1) failure?
If your Chigo Air Conditioner indicates an ambient temperature sensor (T1) failure, check the ambient temperature sensor and replace it if necessary.
What to do if my Chigo COU-18CR1 Air Conditioner has evaporator pipe temperature sensor (T2) failure?
If your Chigo Air Conditioner shows an evaporator pipe temperature sensor (T2) failure, check the evaporator pipe temperature sensor and replace it if necessary.
What to do if my Chigo COU-18CR1 has condenser pipe temperature sensor (T3) failure?
If your Chigo Air Conditioner displays a condenser pipe temperature sensor (T3) failure, check the condenser pipe temperature sensor and replace it if necessary.
What to do if my Chigo Air Conditioner has indoor unit EEPROM failure?
If your Chigo Air Conditioner indicates an indoor unit EEPROM failure, replace the indoor unit EEPROM.
General| Brand | Chigo |
|---|---|
| Model | COU-18CR1 |
| Category | Air Conditioner |
| Language | English |
Explains the model coding system for indoor and outdoor units.
Lists all available indoor and outdoor unit model names and their basic specifications.
Provides visual illustrations of the indoor and outdoor unit designs.
Highlights the key characteristics and selling points of the R410A series.
Covers specifications, features, wiring, and troubleshooting for cassette indoor units.
Details specifications, features, wiring, and troubleshooting for duct type indoor units.
Covers specifications, features, wiring, and troubleshooting for floor & ceiling indoor units.
Provides detailed technical specifications for various outdoor unit models.
Illustrates the electrical connection diagrams for outdoor units.
Lists common faults and their corresponding solutions for outdoor units.
Important safety and procedural guidelines to follow before and during unit installation.
Outlines procedures for ensuring pipe dryness and checking for refrigerant leaks.
Details how to calculate and add extra refrigerant based on pipe length.
Final checks and procedures to confirm correct system operation after installation.
Explains the functions, icons, and operation of the wireless remote controller.
Describes the functions, operation, and installation of the wired controller.
To Next Page