2. Place the film cartridge into the chamber with the protruding end toward the top of the
camera and push it in gently so that it sits firmly in the chamber (Fig. 11 ).
3. Place the trimmed end of the film on the take-up spool along with the arrow mark.
When loading film, make sure that film lies flat between the film guides. And engage the
perforation of the film with the teeth of the sprocket (Fig. 12). Then close the back cover.
4. 35FA Super and 35FA 11 have a convenient cartridge window to confirm what type of
film you are using (Fig. 13).
To Next Page
Loading...
