5. 35FA Super: Open the lens cover, then depress and release the shutter button. The film
will automatically advance to figure "1 " position (Fig. 14). Now the film is correctly
loaded, ready for the first picture. 35FA II: Open the lens cover, then depress and release
the shutter button two or three times until the figure "1" appears in the frame counter for
the first picture (Fig. 15).
www.4.butkus.org
NOTE: The Film Advance Indicator blinks when the film is advancing properly (Fig. 16). If it
does not blink, reload the film.
Proper ways and improper ways to hold you camera.
To Next Page
Loading...
