Fig.
FOCUSING
Release the exposure meter switch and slide
AUTO/MANUAL control on the lens to Auto
position
(Fig.
18
.
Turn the distance ring first in one direction,
then in the opposite direction until microprism
disc in the centre of the image in the view-
finder is sharp
(Fig.
19:.
Picture is now focused.
The distance scale may also be used for focus-
ing. Estimate or measure the
camera-to-sub-
ject distance in feet or in metres, then turn the
focusing ring. So the figure representing that
distance is opposite the index line.
in
focus
out
of
focus
To Next Page
Loading...
