Figure 8 Direct access instrument Outline size diagram (four modulus)
Note 1: The undeclared tolerance is ± 1 mm;
Note 2: Only indicates the size, and the shape of different specifications is slightly different.
Figure 9 current cable terminal (Conductor Cross-sectional Area Range ≤16 mm
2
)
Figure 10 RS485 cable terminal (Conductor Cross-sectional Area Range 0.25-1mm2 )
7. Installation and operation manual
7.1. Inspection Tips
When unpacking the carton, if the shell has obvious signs caused by severe impact or falling,
please contact with the supplier as soon as possible.
To Next Page
Loading...