Need help?Do you have a question about the CHINT DTSU666 Series and is the answer not in the manual?
General| Type | Three-phase electronic energy meter |
|---|---|
| Rated Current | 5A |
| Starting Current | 0.004Ib |
| Frequency | 50/60Hz |
| Display | LCD |
| Mounting | DIN rail |
| Operating Temperature | -25°C to +55°C |
| Storage Temperature | -40°C to +70°C |
| Protection Level | IP51 |
| Rated Voltage | 3x230/400V |
| Communication | RS485 |
| Weight | 0.5 kg |
| Standards | IEC 62052-11 |
| Accuracy Class | 0.5S |
| Humidity | <95% non-condensing |
Details the metering integrated circuit and its functions.
Presents error limits for active and reactive power measurements.
Details how to program the meter's functions and parameters.
Lists and explains programmable parameters like current ratio.
Describes the button operations for programming the meter.
Details the RS485 communication interface and protocol.
Lists Modbus addresses for various parameters.
Troubleshooting steps for no display issue.
Troubleshooting for communication problems.
Troubleshooting for incorrect data readings.
Troubleshooting for data issues via communication.
To Next Page
