2. SHIPPING AND HANDLING
2.4 LIFTING AND HANDLING
• All necessary equipment to move the machine must be supplied by the customer.
• The lifting must be carried out with forklift. Do not use transpallets or hydraulic platforms.
• To handle the machine with any type of crane please contact Chiossi e Cavazzuti technical service
since special equipment and instructions are needed.
2.5 FORKS PLACEMENT
• The machine must be lifted only from the lateral side.
1 ) Spread the forks wide open and align them to the horizontal bars of the frame.
2) Verify that the edge of the forks exit on the other side of the dryer.
3) Always check the overall balance of the machine when moving the machine.
PARAMETER VALUE
To Next Page
Loading...
