10
5-POINT HARNESS OF THE CAR SEAT.
USE FOR GROUPS 0+ and I
INSTALLATION OF THE CAR SEAT GROUP II AND GROUP III
After placing the child in the car seat and fastening the belt, pull the adjusting strap to secure the belt
(6). The seat belts should be adjusted according to the body and size of the child , snug well against
baby’s body and not loosened. The recommended distance between the belts and the body of the child
should be about 3cm (or two ngers).
CAUTION! IN GROUP II AND III, THE SEAT IS FITTED TO THE VEHICLE SEAT WITH THE 3-POINT
BELT OF THE VEHICLE (DIAGONAL AND LAP). ISOFIX MOUNTING IS OPTIONAL AND CAN BE
USED FOR ADDITIONAL ATTACHEMENT OF THE CAR SEAT TO THE VEHICLE SEAT!
CAUTION! When using ISOFIX installation with combination with 3-point safety belt of the vehicle, DO
NOT PLACE THE TOP TETHER!
CAUTION! Only use position 1 for the seat recline!
IMPORTANT! The lap belt should cover the pelvis of the child, not the waist!
IMPORTANT! Connect the
two metal tongues together
DO NOT INSERT THE METAL
TONGUES ONE BY ONE
pull the belt
press
Unfastening
“click”
press
pull
To Next Page
Loading...
