13
ADJUSTING THE HEIGHT OF THE HEADREST
ROTATION/CHANGE OF THE DIRECTION OF THE CAR SEAT
IMPORTANT! Fix the headrest in suitable for your child position. Headrest should not be too high or too
low to the child’s head.
For groups 0 + and I the slot for shoulder straps should higher than the child’s shoulder!
For groups II and III the belts guide for groups II and III (of the head rest should be higher than the
child’s shoulder and the child’s head must be well protected both sides of the headrest.
Notice: Loosen the pulling ring, to x the chosen position.
The seat of the car seat can be rotated at 360°. It can be xed in two positions – ‘FORWARD FACING”
and “REARWARD FACING”.
CAUTION! The seat is xed only in position “REARWARD FACING” or in position “FORWARD FAC-
ING”, when you hear click sound(3). Make sure the seat is xed in the chosen positon (4)!
up
Groups 0+ and I
360
o
“REARWARD
FACING”
For groups 0+ and I
pull
rotate
“click”
1
2
3
4
For groups I, II, III ONLY
for the convenience when
installing the car seat!
ATTENTION!
DON’T USE THIS POSI-
TION WHILE DRIVING!
DO NOT USE THE CAR SEAT IF IT IS NOT
FIXED IN THE CHOSEN POSITION!
ALWAYS CHECK BEFORE DRIVING!
“FORWARD
FACING”
Sideways facing
Groups I and II
down
headrest
2
2
1
To Next Page
Loading...
