Chloride ManageUPS - Page 4

TABLE OF CONTENTS
Page ii
Section V Device Settings – UPS
Status
Diagnostics
Control
Configuration
About UPS
V – 1
V – 3
V – 4
V – 5
V – 7
Section VI Configuring Modbus Services P-Series Only
Modbus TCPIP & Serial Communications
Troubleshooting Communications on Serial Networks
Physical RS485 Network Connection
Configuration for other Serial Communications network
MODBUS Register Map
License Manager
Troubleshooting
VII – 1
VII – 2
VII – 3
VII – 4
VII – 5
VII – 6
VII – 7
Section VII Configuring the Environment Sensor P-Series Only
Hardware Specifications
Hardware Installation
Browser Interface
Sensor Configuration
Environment Sensor Settings ........................................................................... 5
Input Device Settings.......................................................................................... 6
Output Relay Settings ........................................................................................ 7
Chloride Environment Sensor MIB Object List
VIII – 1
VIII – 2
VIII – 3
VIII – 4
VIII – 8
Appendices
Appendix A: Methods for ManageUPS Configuration via Serial
Port
Appendix B: Alarm Detail
Appendix C: Compatibility Table for ManageUPS Blue Bus
Accessories
Appendix D: ManageUPS Technical Specifications
Appendix E: ManageUPS MODBUS Register Map