6
using ONE with QBD76
ONE digital output
QBD76 dual data inputs
QBD76
Connect the S/DIF2 output from the ONE to either BNC INPUT on the QBD76.
If you have more than one source with coaxial output please ensure that the other source is
switched OFF when listening to the ONE (and turn ONE off when listening to the other
source).
We strongly advise that you use 75ohm hard-wired BNC-BNC cables and avoid BNC-RCA
adaptors wherever possible, to avoid problems of impedance mismatch and signal reflections.
RAM buffer settings for QBD76
ONE has been designed as the ultimate reference CD source for the world‟s finest digital-
analogue converters, such as our own QBD76. As such, ONE should be significantly less
reliant on QBD76‟s RAM buffer than many designs; you may still find improved
performance in your system when using the buffer. Please refer to the QBD76 manual for
further details.
To Next Page
Loading...