Chris-Craft 327-Q - User Manual

Shows where to find the engine model and serial number stamped on the engine.

Lists parts for the camshaft assembly, including bearings, sprockets, and timing chain.

Lists parts for the crankshaft assembly, including bearings, seals, and hardware.

Lists various main bearing sets for different engine models and sizes.

Lists parts for the flywheel, pulleys, and water pump drive system.

Lists components for the damper drive hub assembly.

Lists components for the timing chain cover and associated gaskets/fasteners.

Lists parts for the tachometer drive assembly, including adapters and gaskets.

Lists piston and pin assemblies, and piston ring sets for various engines.

Lists connecting rod assemblies, bolts, nuts, and bearings in different sizes.

Lists components for the oil pan, dipstick, and oil pump systems.

Details the oil pump and screen assembly, including attaching hardware.

Lists exhaust and intake valves, springs, dampers, and seals for engine cylinder heads.

Illustrated diagram showing cylinder head and valve components.

Lists parts for valve lifters, rocker arms, push rods, and related adjustment hardware.

Lists complete cylinder heads, gaskets, and cylinder head bolts.

Lists valve covers, oil filter caps, gaskets, and decals for engine valve covers.

Details components for the intake manifold and front lifting ring assembly.

Lists parts associated with the throttle bracket assembly.

Lists parts for the carburetor, flame arrestor, and related linkages.

Lists components for the thermostat and housing, including gaskets and caps.

Lists parts for the crankcase ventilation system, including vent valves and hoses.

Lists components for the fuel pump and filter, including mounting hardware and lines.

Lists parts for exhaust manifolds, headers, risers, and associated gaskets/fasteners.

Lists various exhaust elbows and associated gaskets/fasteners.

Lists components of the ignition distributor, including points, condenser, and rotor.

Lists parts for holding down the ignition distributor assembly.

Lists parts for the ignition coil, its bracket, and related hardware.

Details spark plugs, spark plug cables, and associated decals.

Lists starting motors and related bolts for Prestolite and Delco systems.

Lists relays, terminal blocks, and fastening hardware for starting and charging systems.

Lists alternator assemblies, fans, pulleys, and belts for Motorola and Prestolite.

Lists voltage regulators and associated hardware for different systems.

Lists components for the sea water pump and pulley assembly, including repair kits.

Lists fittings and hoses used at the sea water pump inlet and outlet connections.

Lists parts for the circulating water pump and pulley assembly, including hoses and fittings.

Lists hoses and fittings connecting thermostat housing to exhaust risers and flywheel housing.

Lists complete assemblies for P-300 reverse gears with different ratios and drive types.

Lists various shaft half couplings used with reverse gears.

Lists available gasket sets for reverse gears.

Lists components for the reverse gear housing, including gaskets and fasteners.

Details parts for the reverse gear oil cooler, including lines and fittings.

Lists parts for the reduction gear assembly, including housings and bearings.

Lists main components for the PV-300 V-Drive assembly, including housing and gears.