Need help?Do you have a question about the Christie IMB-S3 and is the answer not in the manual?
General| Type | Integrated Media Block |
|---|---|
| Network Connectivity | Gigabit Ethernet |
| Power Requirements | 100-240VAC, 50/60Hz |
| Resolution Support | 2K, 4K |
| Compatibility | Christie projectors |
| Input Formats | DCP, JPEG2000 |
| Content Support | Digital cinema content |
| Inputs | USB |
| Outputs | HDMI, SDI |
| Storage | Internal storage |
| Security | Content encryption |
Copyright information and trademark acknowledgments for Christie products.
General disclaimers on product specifications, availability, and performance variations.
Details Christie's standard limited warranty, its exclusions, and limitations for products.
Highlights the importance of scheduled maintenance to keep the product warranty valid.
Information on product compliance with regulatory standards, including FCC and IC.
Guidance on product disposal and environmental responsibility according to regulations.
Provides essential safety and warning guidelines before installing or operating the Christie IMB.
Highlights the main capabilities of the Christie Integrated Media Block (IMB), including NAS connectivity.
Instructions on accessing product documentation, including setup and user information, from the Christie website.
Lists additional documents providing further information on the Christie IMB S3 product.
Steps to configure the IP address for the NAS port on the main projector communication board.
Procedure for adding a network attached storage (NAS) device, requiring NFS protocol.
Detailed instructions for connecting a Christie network attached storage (NAS) device to the system.
Steps to create a network share folder on the NAS device for content ingestion by the IMB.
Procedures to ensure NFS service is active and disable sleep mode on the NAS device.
How to set up communication parameters between the Christie IMB and the NAS device.
Instructions for connecting the IMB to a content network to ingest content from external sources.
Diagram illustrating the components and connections within a content network setup.
Procedure to modify the configuration settings for a connected network attached storage (NAS) device.
How to verify and test the network connection to the attached storage (NAS) device.
Procedure to test the read and write performance of the network attached storage (NAS) device.
Steps to remove a network attached storage (NAS) device that is no longer required from the system.
Explanation of icons used within the content manager interface for identifying content types.
Steps to ingest content and decryption keys from an ingest device to the projector.
Procedure to cancel an ongoing content or key ingest operation if it takes too long.
How to check the available storage space on the connected NAS device for content management.
Methods to filter content displayed in the content manager based on specific content types.
How to view the list of available decryption keys required for playing encrypted content.
Options to filter the displayed list of decryption keys by their validity status.
Steps to delete local content from the system to free up storage space.
Procedure for deleting decryption keys that are no longer required or have expired.
How to adjust column visibility in the content manager interface for better information display.
Accessing detailed information about selected content items through the Properties panel.
Steps to load content or playlists and initiate playback on the projector.
Procedure to stop and remove loaded content from playback when it's no longer needed.
How to adjust the global audio delay for synchronized playback of audio and video.
Procedure to set the audio output rate to match the capabilities of the connected audio device.
How to map Digital Cinema Package (DCP) audio channels to AES outputs for correct audio routing.
Steps to enable Dolby Atmos audio playback for compatible content on the Christie IMB.
Procedure to disable Dolby Atmos audio playback when it is no longer required.
How to create a channel to store customized projector settings for input devices connected to the IMB.
Steps to download projector certificates required for DCP decryption and log file signing.
How to check the current status and detailed information of the Christie IMB on the master projector.
Procedure to import a license file to activate specific product enhancements on the IMB.
How to upload a software upgrade package to the Christie IMB from a USB flash drive.
Steps to install a software upgrade package to update the projector's software components.
Procedure to remove a software upgrade package that is no longer required from the IMB.
How to create a new playlist comprised of content files and automated events.
Steps to change the sequence of content or macros within an existing playlist.
How to adjust the timing of a macro's execution within a playlist.
Procedure to substitute existing content in a playlist with new content items.
Steps to remove specific content items from a playlist.
How to create a duplicate of an existing playlist for reuse or modification.
How to open and view a specific intermission playlist from the top-level list.
Accessing detailed information about individual content items within a playlist.
Procedure to import playlists from other projectors or computers on the network.
How to export playlists to other projectors or computers for backup or transfer.
Steps to delete a playlist that is no longer required or has expired.
How to schedule playlists, content, or automation events for automatic playback on specific dates and times.
Procedure to modify the run time, date, and other settings of a scheduled event.
How to copy a scheduled event and paste it to a different date or time.
Procedure to copy and paste all scheduled events for a full day to another date.
Steps to move a scheduled event to a different date and time using cut and paste functionality.
How to load a scheduled event into the playback queue for immediate execution.
Procedure to delete an individual scheduled event that is no longer required.
Steps to clear all scheduled events for a specific day from the scheduler.
How to set the starting day of the week for the scheduler to align with theater schedules.
Procedure to disable the scheduler and stop automatic event execution.
Defines macros as lists of actions for automation and explains their activation methods.
Explains input cues for events and their use in playlists and global triggers for automation.
Describes global triggers as combinations of input cues and macros to initiate automation.
Lists the macro actions available for controlling automated events and system functions.
Lists the built-in commands available for controlling Christie ACT devices.
Lists the built-in commands available for controlling JNIOR devices.
Lists available commands for Dolby Cinema processors like CP650, CP750, and CP850.
Lists the built-in commands available for controlling SKA-3D devices.
Steps to add and configure an automation device for remote control and communication.
How to update settings for existing automation devices, such as IP address or credentials.
Procedure to remove an automation device that is no longer required or physically present.
How to create a macro to perform a specific list of actions on the projector or system.
Steps to execute a created macro to perform its defined sequence of actions.
How to add more actions or commands to an already created macro.
Procedure to combine multiple macros into a single, more complex macro.
Steps to remove a macro that is no longer required from the system.
How to create triggers that activate automation devices within playlists.
How to modify the behavior and parameters of existing playlist triggers.
Procedure to remove a playlist trigger when it is no longer needed.
How to create a global trigger to initiate automation macros based on specific events.
Steps to modify the settings and behavior of existing global triggers.
Procedure to remove a global trigger when it is no longer required.
How to import device libraries containing control commands for specific devices.
Steps to view the available actions and commands within a device library.
Procedure to remove a device library that is no longer needed or used.
How to access and download projector system logs for fault identification and troubleshooting.
Procedure to run the projector interrogator utility for fault identification and correction.
Steps to download required certificates for digital cinema package (DCP) decryption.
How to create a backup file of projector or IMB settings for disaster recovery.
Procedure to export a backup file to another location for safekeeping or transfer.
Steps to import a backup file to restore projector or IMB settings.
Procedure to remove a backup file that is no longer required or has been uploaded in error.
How to restore projector or IMB settings by selecting and applying a backup file.
Details the physical dimensions and weight of the Christie IMB.
Outlines the power requirements for the IMB, including DC power supply and current.
Lists the operating environment requirements for the IMB, including temperature and humidity.
Specifies the environmental conditions for the IMB when it is not in operation.
Lists supported 2D video formats and specifications for cinema content compatible with the IMB.
Lists supported 3D video formats and specifications for cinema content compatible with the IMB.
Details supported MPEG-2 MXF Interop formats and their specifications for content playback.
Lists the supported audio formats and specifications for the Christie IMB's audio output.
Lists compatible Network Attached Storage (NAS) devices that work with the Christie IMB.
Minimum requirements for Network Attached Storage (NAS) devices to ensure compatibility with the IMB.
Provides pin mapping details for the AES3 port connections on the Christie IMB.
Information on control signal compatibility requirements for integrating the IMB with other systems.
Lists the various regulations and standards the product conforms to regarding safety and EMC.
General safety information and precautions related to the use and operation of the product.
Details the product's compliance with electromagnetic compatibility (EMC) standards for emissions and immunity.
Information regarding environmental compliance, hazardous substances, and waste regulations.
Outlines the security policy requirements, ports, and parameters protected by the Christie IMB.
Explains the anti-tampering security module, its monitoring, and activation consequences.
Defines Composition Play List (CPL) as a file specifying assets for digital cinema playback.
Defines Direct Attached Storage (DAS) as computer data storage directly connected to a system.
Defines Digital Cinema Package (DCP) as files containing digital cinema content.
Defines Dynamic Host Configuration Protocol (DHCP) for allocating IP addresses.
Defines Integrated Media Block (IMB) as the component that decrypts and decodes film content.
Defines Key Delivery Message (KDM) as a digital decryption key for encrypted content.
Defines Network Attached Storage (NAS) as computer storage connected to a network.
Defines Network File System (NFS) as a distributed file system protocol.
Defines Original Version (OV) as the first release version of a feature distributed by a studio.
Defines Packing List (PKL) file as a file specifying the contents of a digital cinema package.
Defines Version File (VF) as a supplemental version of a feature with enhancements or corrections.
To Next Page
