Chroma Color Force - 3 Troubleshooting; 4 Specification; Technical Specifications

Color Force User Manual 10 V1.2 November 2009
3. Troubleshooting
Troubleshooting is a process of elimination. First, rule out the other field factors (i.e. bad
connections, faulty cables and power supplies). For technical support and/or parts, please
contact your selling dealer or the offices listed in this manual.
Symptom Possible Cause Solution
Fixture does not respond
to DMX control.
Set to wrong or different DMX
address.
Bad cable connecting DMX control
and fixture.
Bad in/through connection between
adjacent fixtures.
Fans are not working.
Check DMX address and
Mode settings.
Check/replace DMX run
from the console.
Noise from fixture unit. Fan malfunction. Check fan.
Low LED output. Internal temperature is over the
limit.
Check fan.
Check for airflow - to and
from the internal fan.
Check area ventilation.
4. Specification
4.1 Technical specifications
Color Force 72 Color Force 48
Product Code: CHCF72NRGBA CHCF48NRGBA
Dimensions: 1760mm x 180mm x 215mm
69" x 7" x 8.5"
1180mm x 180mm x 215mm
46.5" x 7" x 8.5"
Weight: 22kg / 48lbs 15kgs / 33lbs
Power input rating: 100-240VAC, 6A, 50/60Hz
Power connector in/out: PowerCon
Data connectors in/out: XLR 5-pin
Control protocol: ANSI E1.11 USITT DMX 512-A
Cooling system: Forced - 2 fans Forced – 1 fan
Construction: Anodised aluminium extrusion
Colour: Black
LED cells: 12 8
LED per cell: 24 (6 x RGBA) 24 (6 x RGBA)
Total LED: 288 192
Optics: Specialised close focus lens
Beam angle: 12º (provisional)
Beam distribution: Symmetrical direct illumination
CCT: Adjustable 1000 – 10000K
CRI: 92
Lamp Life: L70 up to 50,000 hours
IP Rating: IP20
Operating temperature: 0ºC to 40ºC
Approvals: Pending