EasyManua.ls Logo

Chrysler 200 2012 - Shift Lever Override

Chrysler 200 2012
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING! (Continued)
Take care to avoid the radiator cooling fan whenever the hood is raised. It can start
anytime the ignition switch is on. You can be injured by moving fan blades.
Remove any metal jewelry such as watch bands or bracelets that might make an
inadvertent electrical contact. You could be seriously injured.
Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas
which is flammable and explosive. Keep open flames or sparks away from the battery.
Do not allow vehicles to touch each other as this could establish a ground connection
and personal injury could result.
Failure to follow this procedure could result in personal injury or property damage due to
battery explosion.
Do not connect the cable to the negative post (-) of the discharged battery. The
resulting electrical spark could cause the batter y to explode and could result in personal
injury.
SHIFT LEVER OVERRIDE
If a malfunction occurs and the shift lever cannot be moved out of the PARK position,
you can use the following procedure to temporarily move the shift lever:
To access the shift lever override, remove the cupholder liner.
Firmly set the parking brake.
Turn the ignition switch to the ACC or ON position without starting the engine.
Press and maintain firm pressure on the brake pedal.
Using a screwdriver or similar tool, press and hold the override tab through the access
port on the center console.
Move the shift lever into the NEUTRAL position.
The vehicle may then be started in NEUTRAL.
Reinstall the override cover.
WHAT TO DO IN EMERGENCIES
76

Table of Contents

Related product manuals