Manual Operation
This system offers a full complement of manual override
features. The indicator light in both the ⬙AUTO HI⬙ or
⬙AUTO LO⬙ buttons will turn off when the system is
being used in the manual mode. The fan speed, airflow
distribution, and outside air/recirculated air can be
manually adjusted.
NOTE: Each of these features operate independently
from each other. If any one feature is controlled manually,
the remaining features will continue to operate automati-
cally.
The front blower control can be set to any fixed
blower speed by pressing the rocker switch up or
down. This allows the front occupants to control the
volume of air circulated in the vehicle and cancel the auto
mode. The fan will now operate at a fixed speed until
additional speeds are selected or until either the ⬙AUTO
HI⬙ or ⬙AUTO LO⬙ buttons are pressed. The system will
continue to automatically adjust air temperature and
airflow distribution.
The operator can also select the direction of the air by
pressing the mode control rocker switch located to the
left of the A/C button and selecting one of the following
positions.
UNDERSTANDING YOUR INSTRUMENT PANEL 235
4
To Next Page
Loading...
