•
The UConnect™ system will play the phone names of
all paired cellular phones in order from the highest to
the lowest priority.
Select another Cellular Phone
This feature allows you to select and start using another
phone with the UConnect™ system. The phone must
have been previously paired to the UConnect™ system
that you want to use it with.
•
Press the ’Phone’ button to begin.
•
After the ⬙Ready⬙ prompt and the following beep, say
⬙Setup Select Phone.⬙
•
When prompted, say the phone name of the cellular
phone you wish to use, or say ⬙List Phones⬙ to hear a
list of all the phones that have been paired to your
UConnect™ system. To select a phone from the list,
press the ’Voice Recognition’ button and say ⬙Select.⬙
•
A lower priority phone will only be used for the next
phone call. After that, the UConnect™ system will
return to using the highest priority phone present in or
near (approximately with in 30 feet) the vehicle.
Delete UConnect™ Paired Cellular Phones
•
Press the ’Phone’ button to begin.
•
After the ⬙Ready⬙ prompt and the following beep, say
⬙Setup Phone Pairing.⬙
•
At the next prompt, say ⬙Delete.⬙
•
You will be asked to say the name of the phone that
you wish to delete. You can either say the name of the
phone that you wish to delete or you can say ⬙All⬙ to
delete all the phones.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
3
To Next Page
Loading...
