Need help?Do you have a question about the Chrysler 225 and is the answer not in the manual?
General| Type | Inline 6-cylinder |
|---|---|
| Displacement | 225 cu in (3.7 L) |
| Compression Ratio | 8.4:1 |
| Cooling System | Water-cooled |
| Valvetrain | OHV |
| Fuel Type | Gasoline |
| Stroke | 4.125 in (104.78 mm) |
| Horsepower | 145 hp (108 kW) @ 4000 rpm |
| Torque | 215 lb-ft (292 N⋅m) @ 2400 rpm |
| Fuel System | Carburetor |
Lists essential daily inspections for bilge, fuel, cooling, oil, and connections.
Step-by-step guide for starting and safely stopping the engine.
Guides on choosing the correct API and SAE rated engine oil.
Details periodic oil changes, level checks, and oil filter replacement intervals.
Lists daily inspections for bilge, fuel, water, and oil levels before starting.
Outlines additional checks and lubrication for linkages and distributor.
Details engine oil, oil filter changes, and battery checks.
Lists causes and solutions for starter motor failure.
Troubleshoots issues with the starter drive pinion engagement.
Covers common causes like ignition, fuel, and timing issues preventing engine start.
Identifies reasons for engine stopping and intermittent or continuous misfiring.
Lists potential causes for engine knocking, pinging, pounding, and vibration.
To Next Page
