1 / 300 SRT8
®
SPECIFICATIONS http://media.chrysler.com
2012 Chrysler 300 SRT8
®
SPECIFICATIONS
All dimensions are in inches (millimeters) unless otherwise noted.
All dimensions are measured at curb weight with standard tires and wheels.
Note: Information shown is correct at time of publication, and is subject to change without notice.
Brampton Assembly Plant, Ontario, Canada
Summer 2011 as 2012 model
ENGINE: 6.4-LITER HEMI
®
V-8 WITH FUEL SAVER TECHNOLOGY
90-degree V-type, liquid-cooled
Displacement, cu. in. (cu. cm.)
4.09 x 3.72 (103.9 x 94.5)
Pushrod-operated overhead valves, 16 valves with sodium-filled
exhaust valves and hollow stem intake valves,
16 conventional hydraulic lifters, all with roller tips
Sequential, multi-port, electronic, returnless; automatic features
Fuel Saver mode
Deep-skirt cast-iron block with cross-bolted main bearing caps,
aluminum alloy heads with hemispherical combustion chambers
470 hp (351 kW) at 6,000 rpm
470 lb.-ft. (637 N•m) at 4,300 rpm
6,400 rpm (electronically limited)
Premium 91 octane (R+M)/2 — recommended
Coolant Capacity, qt. (L)
Dual close-coupled three-way catalytic converters, quad-heated
oxygen sensors and internal engine features(a)
EPA Fuel Economy mpg (City/Hwy)
Saltillo Engine Plant, Saltillo, Mexico
(a) Meets Federal Tier 2 Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York, Maine, Vermont,
Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington.
To Next Page
Need help?
General
