Radio Operation
5. stereo indicator appears while radio is receiving
stereo signals
6. compass appears when navigation is not active;
while navigation is active, turn-by-turn driving rec-
ommendations appear here
7. TP indicator appears if the RDS transmitter is
equipped with a traffic program. An inverted
m
icon appears on the display while the traffic pro-
gram is active.
8. press the multifunction key below this symbol to
access FM preset stations 7 through 12.
9.
TUNE appears here while manual tuning is active.
Program type appears here if PTY is active. Other-
wise, time of day is displayed.
18
CHANNEL SELECTION FOR FM RADIO
Methods to select FM radio stations are seek, scan,
storing/recalling preset stations and manual tuning.
Seek
Turn the right knob clockwise or counter-clockwise to
tune to the next/previous receivable and identifiable
FM station. If no FMstation is found, the tuner remains
at the current frequency.
Scan
Push in the right knob to start an FM station search.
The radio sweeps through the entire FM band. During
the first pass, the radio plays 5 seconds of each strong
station. For second and subsequent passes, the radio
plays 5 seconds of every available station. The scan
icon ~ flashes while the radio scans.
Scan continues until it is stopped by one of:
• right knob is pushed in again
• right knob is turned clockwise or counter-clockwise
To Next Page
Loading...
