For the full procedure on how to charge your vehicle,
using AC Level 1 Charging, and further information
on the EVSE Charging Cordset, refer to your Owner’s
Manual:
• U.S. residents visit: www.mopar.com/en-us/care/
owners-manual.html
• Canadian residents visit: www.owners.mopar.ca
AC Level 2 Charging
(240V, 30 Amp)
AC Level 2 (240V) charging requires a 240V, Level
2 EVSE (Charging station). A 30A Level 2 EVSE for
home installation is recommended.
When using public charging stations, ensure the
charging station is ready to provide charge and the
vehicle is in PARK before the charge connector is
plugged into the vehicle’s charge inlet. You will hear a
“click” when the charge connector is inserted correctly
and is coupled with the vehicle’s charge inlet. The
vehicle should start charging automatically. If not,
please check the instructions at the charging station.
For the full procedure on how to charge your vehicle,
using AC Level 2 Charging, and further information
on the EVSE Charging Station, refer to your Owner’s
Manual:
• U.S. residents visit: www.mopar.com/en-us/care/
owners-manual.html
• Canadian residents visit: www.owners.mopar.ca
It is recommended to turn the charger off before
removing the cord by pressing the "Stop" button.
Charging Times
Type of EVSE Estimated Charge Time
Level 1 (120V/15A) Approximately 14 hours
Level 2 (240V/30A) Approximately 2 hours
For further information on charging times, refer to
your Owner’s Manual:
• U.S. residents visit: www.mopar.com/en-us/care/
owners-manual.html
• Canadian residents visit: www.owners.mopar.ca
Instrument Cluster High
Voltage Battery Gauge
There is a battery gauge indicator located on the
instrument cluster. The battery gauge will display the
current state of charge for the high voltage battery;
with the percentage value located to the left of the
symbol.
High Voltage Battery Gauge
VEHICLE CHARGE
INDICATORS
To Next Page
Loading...
