3. Remove the bulb from the connector socket and install
the replacement bulb.
4. Install the bulb and connector assembly into the
headlight housing and rotate the connector
1
⁄
4
turn clock-
wise to lock it in place.
Front Fog Light
NOTE: Access to the lights through the lower fascia
cutout is limited. We recommend you access the lights by
turning the steering wheel to allow access and remove
the inner fender shield.
1. Rotate the bulb’s electrical connector
1
⁄
4
turn counter-
clockwise and remove it from the fog light housing.
Front Fog Light
MAINTAINING YOUR VEHICLE 403
7
To Next Page