1413
Disarm by RFID tag
User can enable or disable the function of disarming by RFID
tag, or disarming silently by RFID tag.
Enable Disarming by RFID Tag
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Disable Disarming by RFID Tag
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Disarming Silently by RFID Tag
The control panel and siren will hoot twice when disarming
by RFID tag. If set disarming silently by RFID tag, the control
panel and siren will keep silent to finish disarming without
disturbing neighborhood.
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for
10 seconds, the setup is successful.
Note! Default setting: 1, turn on disarm by RFID tag and the siren will
hoot when disarming.
5 0
5 2
5 1
To Next Page
Loading...