Battery with a low battery.
1. When the ‘C’ Symbol located above the number 3 on the PIN
pad is lit up you need to change the battery.
2. Open the safe with your PIN number.
3. Locate the battery box cover on the back of the door.
4. Remove the cover and replace the batteries making sure you
follow the + and – signs.
Replacing the Batteries with now power – you will need your key/override
for this
1. Place a small screw driver into the slots located at the bottom of
the lock and press up gently (diagram 1)
2. Lift the lock face plate up to reveal the override key lock
(diagram 2)
3. Place the override key into the lock and turn anti clock
ways.(dialgram3)
4. Turn the handle to the right to retract the bolt work
5. Replace the batteries as described above.
3 X Incorrect PIN attempts will result in a 20 second time
out period.
Wait 20 seconds before trying your PIN again.
HANDY TIPS
Note: please refer to User guide that is packed with your
safe for installation methods & full instruction manual.
Your safes comes with an override key. It is strongly
recommended that this key is not kept in your safe.
When changing your PIN number ALWAYS test the PIN with the door open.
To Previous Page
Loading...
