21
8. Sanitary Maintenance
Section Details
Location
Environment
Installation
Water
dispensing
spout
Ice dispensing
hole
Water gutter
Use
- The unit can be installed at low water pressure place within water quality
range.
-
Cleaning up water dispensing spout once a week is recommended. If foreign
substance splashes onto water dispensing spout, wipe it off right away.
-
Do not take water with your mouth and not let used cup touch water
dispensing spout.
- Avoid taking ice with cup filled with beverage, coffee etc.
- Cleaning up ice dispensing hole once a week is recommended. If foreign
substance splashes onto ice dispensing hole, wipe it off right away.
- Separate cap from ice dispensing deco and clean up once a week.
<Do not install the unit in places below>
- A place exposed to direct sunlight.
- Nearby toilet.
- In front of cooling-heating device.
Self
maintenance
Checkup
Maintenance
- Clean up water dispensing spout, ice dispensing spout and water gutter on
regular basis.
- Do not throw away any liquid except water.
- If there is the water, throw it away and clean up once a week.
Filter
replacement
Unit with ACS
Unit without
ACS
-
5 minutes of flushing is necessary. If not, carbon power can be found in water tank.
- Do not allow external shock to the filter.
Prevention of
scale buildup
- The unit is designed to empty water every 4 days to prevent scale.
- In case the unit is not used for long of period time more than 4 days, empty
water in the tank completely to let new water come in and empty water
again to take fresh water.
- Empty water tank every month and clean up with soft cloth or dry cleaner.
- Regular cleaning is necessary to prevent scale buildup.
To Next Page
