DISPLAY MESSAGE:
s
I AC-OFF
1+
COUNT - DOWN DISPLAY:
The balance will count down "9999999 to
?0ooooo" when
plugged into a power source before it is ready for
weighing.
STANDBY:
"S" sign indicates power is supplied to the balance.
POWER WARNING:
The power supply should not be off during STANDBY .
If power supply is off during STANDBY, then this message
will be appeared when replugged into the power source.
CAPAClTY ERROR:
"+" sample exceeds balance capacity.
"-" weighing pan or holder is out of place.
o
I SAP-2
I STb-2
H
ZERO INDICA TOR:
" .•••" sign indiates display is stable at 011zero reading.
SAMPLlNG INTERVAL:
Displays selected sampling interval (Integration Time).
See SAMPLlNG INTERVAL FUNCTION section, page 9.
5TABILlTY INDICA TOR COUNT:
Indicates selected stabilization requirements.
See STABILlTY INDICA TOR FUNCTION section,
page 9.
HOLD- DISPLAy MODE:
"H" sign indicates reading result is frozen.
See STABILlTY INDICA TOR FUNCTION section,
page 9.
-5-
To Next Page
Loading...