To Next PageTo Next Page
Need help?Do you have a question about the CIANFLONE X Series and is the answer not in the manual?
Procedures and recommendations for monitoring radiation exposure.
Manufacturer's warranty and user responsibilities regarding regulations.
Precautions for individuals with radioactive medical dyes.
Overview of the wavelength dispersive XRF analyzer.
Details configuration, sample holder, and capabilities.
Component verification, assembly, and quality checks.
Information on calibration and radiation compliance certificates.
Description of the X-ray tube, its function, and alignment.
Identifies and explains safety labels on the device.
Details the "CAUTION RADIATION" label placement and visibility.
Location and content of serial number and fuse labels.
Explains system test alerts and failure indications.
Describes the audible alert accompanying the X-ray on indicator.
Explains the fail-safe warning light and software indicators.
Explains the crucial role of interlocks in preventing radiation exposure.
Details the operation of the X-ray on/off key switch.
Describes the interlock switch on the rear panel.
Explains sample holder interlocks for safety.
Details the shielding materials and design for radiation containment.
Discusses requirements for personal and area radiation monitoring.
Outlines procedures for leakage testing and survey specifications.
Recommends certified technicians for maintenance and annual certification.
Details voltage, frequency, grounding, and dedicated power source needs.
Guidance on ideal placement and environmental conditions.
Step-by-step instructions for assembling the instrument.
Procedure for safely powering down and disassembling the unit.
Guidelines for safely moving the Portaspec unit.
Information on optional premium cases for shipping and storage.
Describes the path of radiation from source to detector.
Operator qualifications, training, and familiarity with manual.
Ideal temperature, humidity, and handling conditions.
Step-by-step guide for initial setup and connection.
Guide for performing the first analysis with calibration sample.
Techniques for preparing and presenting samples for analysis.
Methods for identifying and quantifying elements in samples.
Details on water cooling requirements and precautions.
Identification of components on the front of the Portaspec.
Identification of components on the rear of the Portaspec.
Identification of internal components on the rear panel.
Identification of main internal assemblies.
Description of the optical path components.
Details of the coolant circulator accessory.
Instructions for filling and preparing the coolant circulator.
Details of the constant voltage regulator accessory.
Common problems, their causes, and solutions.
Procedure for adjusting element stops for accurate settings.
Detailed steps for setting element stops using the software.
Schedule of daily, monthly, and yearly maintenance tasks.
List of recommended spare parts for inventory.
Comprehensive technical specifications of the instrument.
Data table of X-ray emission lines and angles.
Periodic table indicating analyzable elements.
Chart showing spectral interferences and resolution.
Table related to counting statistics and confidence levels.
Electrical schematic of the Portaspec system.
Specific warranty terms for the X-ray tube component.
General| Brand | CIANFLONE |
|---|---|
| Model | X Series |
| Category | Laboratory Equipment |
| Language | English |
