EnglishEnglish
Programming- Engineer Mode
Press “+” or “-” to change
See chapter “PROGRAMMING THE
DISPENSING KEYBOARD KEYS”.
Press “+” or “-” to change
Press the keys “+” and “-” to load (YES) or not
load (NO) the standard data.
If “YES” is selected and the PROG key pressed
the manufacturer’s data will be loaded
Press “+” or “-” to activate (YES) or deactivate
(NO) the customer programming function.
When the customer programming is deactivated
(NO), the customer programming menus will not
be displayed.
Press the “+” or “-” keys to activate (YES) or
deactivate (NO) the clock function.
When the clock function is deactivated (NO), the
clock menus will not be displayed.
Working time
Hour ON: 23.00
Dosage Programing
Push the Button
Closing day
None +/-
Standard Data NO
Option
Customer program NO
Option
Clock NO
To Next Page
Loading...
