EasyManua.ls Logo

Cime CO-O4 - Maintenance and Function Settings; Cleaning the Groups; Hot Water and Steam Operation

Cime CO-O4
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
22
CLEANING THE GROUPS
Press button (14) and (18), (see photo detail), the machine will per-
form 5 cleaning processes for each group. In case you want to inter-
rupt the cleaning process, press the (E / STOP) (18)
TIME - DAY SETTING
Time / Day setting, reading, etc.., set up through left push buttons
in following sequence:
Press and hold (E / Stop) (18) about 10 seconds, once “set clock”
will appear on the display, the time can be adjusted by using the
buttons (14) (15).
To access to the successive functions press E / STOP button (18).
DISPLAY THE SUPPLIED COFFEE
To reset Coffee doses quantity in the different dosages, including
the continuous dispensing: position on total coffee and press the
buttons (16) - (17) simultaneously
LANGUAGE AND OTHER SETTINGS
Place the display in the off position, selecting almost simultaneously
the keys in sequence (18) - (16)
Press and hold the button for about 10 seconds E / Stop (18) until
on the display will appear “language”, press the button (14) to select
the desired language.
OTHER FUNCTIONS
To access additional functions press the button (18) E / stop switch
on the display by pressing the buttons in rapid succession (18) E /
stop (16) long coffee
HOT WATER
Press the hot water button (12)
STEAM
To produce steam, turn the knob counterclockwise (01)