EasyManua.ls Logo

Cincinnati Sub-Zero Products, LLC BLANKETROL III 233 User Manual

Cincinnati Sub-Zero Products, LLC BLANKETROL III 233
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation Manual
Model 233 Hyper-Hypothermia System
Cincinnati Sub-Zero Products, LLC 12011 Mosteller Road Cincinnati, Ohio 45241, U.S.A.
www.cszmedical.com
BLANKETROL
®
is a registered trademark of Cincinnati Sub-Zero Products, LLC, Cincinnati, Ohio USA
Copyright 2018, Cincinnati Sub-Zero Products, LLC All rights reserved.
Manual 57201 Rev. Z
ECN: M1807-5495

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cincinnati Sub-Zero Products, LLC BLANKETROL III 233 and is the answer not in the manual?

Cincinnati Sub-Zero Products, LLC BLANKETROL III 233 Specifications

General IconGeneral
BrandCincinnati Sub-Zero Products, LLC
ModelBLANKETROL III 233
CategoryMedical Equipment
LanguageEnglish

Summary

Section 1: Introduction

General Safety Precautions

Essential safety guidelines for operating the BLANKETROL III system, covering knowledge and understanding.

System Overview & Physical Features

General description, indications for use, and physical layout of the BLANKETROL III system, including the control panel.

Accessories & USB Port

Lists required accessories and explains the function of the USB port for data transfer.

Section 2: General Preparation

Introduction & Unpacking

Outlines preparation procedures and covers unpacking the BLANKETROL III shipment.

Setup, Testing & Patient Precautions

Procedures for inspection, arrangement, system tests, and critical patient/unit safety precautions.

Section 3: Operating the BLANKETROL III System

Component Arrangement & Modes Overview

Steps for arranging system components and an overview of various operating modes (Auto, Manual, Gradient, Monitor).

Specific Operation Procedures

Detailed steps for operating in Auto Control, Manual, Gradient, and Monitor Only modes.

Concluding Treatment & Status Messages

Procedures for ending therapy and understanding system status messages for troubleshooting.

Section 4: General Maintenance

Exterior, Reservoir, and Blankets

Instructions for cleaning the unit exterior, maintaining the water reservoir, and caring for hyper-hypothermia blankets.

Probe Maintenance and Unit Disposal

Maintenance guidelines for reusable probes and procedures for the proper disposal of the BLANKETROL III unit.

Section 5: Specifications and Certifications

Model 233 Features

Detailed physical, thermal, electrical, and safety features of the BLANKETROL III Model 233.

Control System & Environmental Specs

Specifications for the control system, temperature settings, environmental conditions, and warranty.