What to do if Cinderella TRAVEL have a problem with the gas burner after 3 attempts to ignite it?
If you are experiencing issues with the gas burner after three ignition attempts with your Cinderella Toilet: 1. Check that the gas is connected; connect it if necessary and reset the toilet. Reset the thermal switch if needed. 2. Open and close the toilet lid. 3. Start incineration. 4. If the error continues, contact dealer/service.
What to do if ash container is not in correct position in Cinderella Toilets?
If the ash container is not in the correct position in your Cinderella toilet, place the ash container into the correct position.
What to do if gas burner doesn't ignite after 3 attempts in Cinderella toilet?
If you're experiencing issues with the gas burner in your Cinderella toilet after three ignition attempts: 1. Check that the gas is connected, and connect it if necessary. 2. Reset the toilet. 3. Reset the thermal switch if needed. 4. Open and close the toilet lid. 5. Start incineration. 6. If the problem continues, contact your dealer or service center.
How to fix burnt smell outside when using Cinderella toilet?
If you notice a burnt smell outside your caravan/motor home coming from the Cinderella toilet, clean the catalytic converter and ensure that the exhaust pipe is open.
What to do if hatch is jammed in Cinderella toilet?
Here's what to do if the hatch is jammed on your Cinderella toilet: * When the toilet is warm: 1. Press the start button multiple times without inserting a new bowl liner. 2. Open the lid after each attempt. If this doesn't work, wait for the toilet to cool down (until the fan has stopped). * When the toilet is cold: 1. Open the toilet lid and press start. The lid opens. 2. Remove the cause of the blockage.
How to fix problem with exhaust fan in Cinderella toilet?
If you are experiencing a problem with the exhaust fan in your Cinderella toilet: 1. Reset the toilet. 2. Open and close the toilet lid. 3. Start incineration. If the error continues, contact your dealer/service for assistance.
What to do if Cinderella Toilets display an error in the temperature sensor?
If your Cinderella Toilet displays an error in the temperature sensor, try to reset the toilet. If this does not work, contact workshop or dealer.
What to do if the hatch is jammed in Cinderella Toilets?
If the hatch is jammed in your Cinderella Toilet: * When the toilet is warm: 1. Press the start button multiple times without inserting a new bowl liner. 2. Open the lid after each attempt. If this doesn't work, wait for the toilet to cool down (fan has stopped). * When the toilet is cold: 1. Open the toilet lid and press start. The lid opens. 2. Remove the cause of the blockage.
What to do if Cinderella TRAVEL Toilets minimum allowed voltage is less than 10.5 V and the gas supply is shutoff?
If the minimum allowed voltage is less than 10.5 V and the gas supply is shutoff in your Cinderella Toilet, resolve the error on the 12V supply from the motor home/caravan.
What to do if Cinderella TRAVEL Toilets show no lights and no sound?
If your Cinderella Toilet shows no lights and produces no sound, check that the caravan's/motor home's main switch is on and that the 12 V voltage is connected.
Safety precautions for gas usage and storage in recreational vehicles.
Overview of built-in safety features of the Cinderella Travel toilet.
Details on safety certifications and standards compliance.
Technical specifications and components of the toilet.
Initial setup and connection checks before operating the toilet.
Step-by-step guide on how to use the Cinderella Travel toilet.
Important usage guidelines and tips for optimal operation.
Instructions for safely emptying the ash container.
Recommendations for using the toilet in winter conditions.
Explanation of the indicator lights on the control panel.
Procedure for cleaning the ash container and its insert.
Instructions for cleaning the toilet bowl.
Guide on how to clean the catalytic converter for optimal performance.
General| Type | Incineration toilet |
|---|---|
| Color | White |
| Ventilation Pipe Diameter | 110 mm |
| Material | Stainless steel |
| Safety Approvals | CE |
| Power Source | Battery or mains electricity |
To Next Page
