To Next Page

To Previous Page

- 4 -

RK25 Mobile Computer

 The allowed battery charging ambient temperature is between 0°C to 40°C. It is

recommended to charge the battery at room temperature (18°C to 25°C) for optimal

performance.

 Please note that battery charging stops when ambient temperature drops below 0°C or

exceeds 40°C.

 In order to prevent system from shutting down after the battery is drained out, keep a

fresh battery for replacement at all times, or connect the mobile computer to an external

power.

 If there are drippings or dust on the device or battery pack, wipe them away with a soft

clean cloth before battery replacement.

 Turn off the power before battery replacement.

 If you want to put away the mobile computer for a period of time, remove the battery

pack from the mobile computer’s battery compartment. Store the mobile computer and

battery pack separately.

 Recycle batteries in a proper way for the green-environment issue.

SCANNER

 Scan a 1D barcode

1) Open ReaderConfig and tap Scan Test on the menu bar.

2) Aim the scanning window at the barcode to read. Move the device, having the barcode

located in the center of the scanning area.

3) Press any of the two side triggers. The scanning light beams to read the printed barcodes.

The buzzer beeps after scanning. The scanning light goes off once the data is decoded,

or when the decode timeout period has passed.

 Scan a 2D barcode