What to do if my CIRCLE FITNESS Equipment shows a COMMUNICATION FAIL error?
If your CIRCLE FITNESS Fitness Equipment displays a COMMUNICATION FAIL error, it indicates a communication timeout. First, check that the console and generator are properly connected. If the connection is correct and the error persists, the console or generator may need to be replaced.
What to do if my CIRCLE FITNESS Fitness Equipment displays a DC BUS ERROR?
If your CIRCLE FITNESS Fitness Equipment shows a DC BUS ERROR, it means the generator isn't converting AC to DC power correctly. Here’s what to do: 1. Stop pedaling and wait for the power to shut down. 2. Then, pedal again to power up the console. If the error reappears, the generator needs to be replaced.
What to do if my CIRCLE FITNESS Fitness Equipment shows a SHORT CIRCUIT error?
If your CIRCLE FITNESS Fitness Equipment displays a SHORT CIRCUIT error, it indicates that the IGBT of the generator is short-circuited. To resolve this: 1. Stop pedaling and wait for the power to shut down. 2. Pedal to power up the console again. If the error message continues to appear, the generator should be replaced.
General| Brand | CIRCLE FITNESS |
|---|---|
| Model | E7 Elliptical |
| Category | Elliptical Trainer |
| Language | English |
To Next Page
