Need help?Do you have a question about the Circontrol CCL-WB2M-SMART series and is the answer not in the manual?
General| Brand | Circontrol |
|---|---|
| Model | CCL-WB2M-SMART series |
| Category | Automobile Battery Charger |
| Language | English |
Crucial guidelines for safe operation and installation of the charging unit.
Overview of the smart post charging solution and its compliance with standards.
Details on display, connector lock, RFID, Ethernet, 3G, energy metering, and remote control.
Step-by-step guide on how to initiate the electric vehicle charging process.
Explains the messages displayed on the unit while an EV is actively charging.
Step-by-step instructions on how to properly end an EV charging session.
Details the summary information shown on the display when a charging session concludes.
Lists the required hardware and software for establishing an Ethernet connection.
Illustrates the Ethernet connection setup between a PC and the charge station.
Detailed guide on how to connect a laptop to the charge station via LAN.
Accessing and configuring network, modem, locale, time, and security settings via the web interface.
Details on accessing additional web pages for logs, modem status, and device status.
Guide for configuring 3G connectivity, including APN, User, and Password settings.
Managing and enabling integration types, such as OCPP, on the charge point.
Detailed configuration of the OCPP engine, including application parameters and charge box settings.
How to connect and monitor the charge station using the dedicated CirCarLife client.
How to access and monitor the charge station's status via a standard web browser.
Explains the main menus (Options, Views, General) for navigating the CirCarLife Scada client.
Details the functions and customization options of the client software's toolbar.
Describes the status bar, providing general information about the Scada engine connection.
How to create and interpret graphs to visualize charge point data and variables.
Utilizing Scada tables to view recorded variables and customize table properties.
Viewing, acknowledging, and managing real-time events and alarms within the Scada client.
Describes the general state of the charge point, including leakage, tamper, and tilt status.
Details the status of each plug, vehicle connection, and connector lock.
To Next Page