Need help?Do you have a question about the Circontrol eHome Series and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Charging Standard | IEC 61851 |
| Connector Type | Type 2 |
| Rated Power | 22 kW |
| Input Voltage | 400 V AC |
| Current | 32 A |
| Communication Protocol | OCPP 1.6 |
| Enclosure Rating | IP54 |
| Operating Temperature Max | 55°C |
| Mounting | Wall or Pole Mounted |
| Cable Length | 5 m |
| Protection | Overcurrent, Overvoltage, Short Circuit, Ground Fault |
| Output Voltage | 400 V AC |
Step-by-step guide on how to connect and start charging an electric vehicle with the Wallbox eHOME.
Details the different error codes indicated by the status LED bar and their meanings.
Provides commissioning information for Wallbox eHOME series and describes electrical components and installation steps.
Key considerations for the electrical wiring connection, including power supply and line dimensioning.
Specifies the minimum distances required around the unit for maintenance and safety reasons.
Lists the materials included with the Wallbox eHOME charging point for installation.
Step-by-step instructions and safety precautions for opening the Wallbox eHOME enclosure.
Details the methods for inserting the power supply line cable into the unit's housing.
Procedure and considerations for securely mounting the Wallbox eHOME unit to the wall.
Covers the essential electrical installation steps, including power supply protections and connections.
To Next Page
