Batteries:
l Use only 1.5V “AA” type, alkaline batteries (not
included).
l Insert batteries with correct polarity.
l Non-rechargeable batteries should not be
recharged.
l Rechargeable batteries should only be charged
under adult supervision, and should not be
recharged while in the product.
l Do not mix old and new batteries.
l Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel-cadmium) batteries.
l Remove batteries when they are used up.
l Do not short circuit the battery terminals.
l Never throw batteries in a re or attempt to
open its outer casing.
l Batteries are harmful if swallowed, so keep away
from small children.
!
1. Most circuit problems are due to incorrect assembly, always double-check that your circuit exactly matches
the drawing for it.
2. Be sure that parts with positive/negative markings are positioned as per the drawing.
3. Be sure that all connections are securely made.
4. Try replacing the batteries. Note: Rechargeable batteries do not work as well as alkaline batteries.
E-Blox
®
is not responsible for parts damaged due to incorrect wiring.
Basic Troubleshooting
Note: If you suspect you have damaged parts, you can follow the Advanced
Troubleshooting procedure on page 15 to help determine which ones need replacing.
-2-
To Next Page
Loading...