Let's meet all the components that arrived in
the box!
Open your Synthia box and check if you have all the components. Make sure to lay
it all on a clean surface where you'll inspect if everything is there according to the
photo and the list below.
In case something is missing, please contact us atcontact@circuitmess.com.
Send us a photo of everything that came in the box, and we'll get back to you as
soon as possible to resolve the issue.
Here's the list of components:
1. Acrylic casings
2. Circuit board
3. Plastic caps for sliders
4. Button caps
5. Encoder caps
6. Connector for the speaker
7. Speaker
8. Adhesive rubber feet
9. Screw roundhead M3x12mm
10. Brass standoffs
11. Screw roundhead M3x5mm
12. USB-C cable
13. Sliders
14. Rotary encoders
15. Pushbuttons
16. Headphone jack
To Next Page
Loading...