44
electric power lines and phone lines look alike. For your safety, assume
that any overhead lines can kill you
ensure proper grounding of the mast of the LOOP ANTENNA
when installing your antenna, do not use a metal ladder
do not work on a wet or windy day
do dress properly, wearing shoes with rubber soles and heels, rubber
gloves, long sleeve shirt or jacket
be sure to tighten the bolts and nuts to the correct level
DO NOT STAY near the antenna while transmitting
do not use LOOP ANTENNA near people and/or animals
MOTOR CABLE
The type of motor cable depends on the distance between the LOOP ANTENNA and
the A.T.U.
- up to 20 metres (65.62ft) => 2x0.75 (2x18 AWG) cable needed
- from 20 to 30 metres (65.62 – 98.43ft) => 2x1.50 (2x15 AWG) cable needed
- over 30 metres (98.43ft) => 2x2.50 (2X13 AWG) cable needed
The BABY LOOP
The BABY loop is very easy to install.
We ship the BABY LOOP fully assembled to Maninland Europe only.
We send the BABY LOOP unassembled to all other destinations.
45
Assembled BABY LOOP packaging contents
Art. Description Quantity
0101
0102
0106
Antenna assembled ready to install
Stainless steel mast clamp and hardware
Accessory box with:
1 loop controller ATU
1 power supply for ATU
1 USB keyboard for ATU
1 bolts kit
1 instruction manual
1
1
1
Unassembled BABY LOOP packaging contents
Art. Description Quantity
0101S
0102
0107
Antenna unassembled split in two
Stainless steel mast clamp and hardware
Accessory box with:
1 loop controller ATU
1 power supply for ATU
1 USB keyboard for ATU
1 bolts kit
1 wrench key ø5
1 wrench key ø6
1 onti-oxide paste
1 instruction manual
1
1
1
To Next Page
Loading...