Cisco MERAKI MS120-8 Series User Manual (English)

To Next Page

MS120-8 Series Installation Guide

About this Guide

This guide provides instruction on how to install and configure your MS120-8 series switch. This guide also provides mounting instructions and limited

troubleshooting procedures. For more switch installation guides, refer to the switch installation guides section on our documentation website.

Model Number Description

MS120-8 Layer-2 8-port gigabit Ethernet switch with 2 SFP interfaces

MS120-8LP

Layer-2 8-port gigabit Ethernet 67W PoE switch with 2 SFP

interfaces

MS120-8FP

Layer-2 8-port gigabit Ethernet 124W PoE switch with 2 SFP

interfaces

Product Overview

Physical Specifications

MS120-8 MS120-8LP MS120-8FP

1Gbe RJ45 8

1Gbe SFP 2 2 2

Dedicated Mgmt Interface - - -

PoE Capable - Yes, 67W Yes, 124W

Power Consumption

5 - 161W 5 - 161W 5 - 161W

Power Load (idle/ max) 5 / 9 W 7 / 88 W 9 / 161 W

Operating Temperature

32°F - 113 °F

0°C - 45°C

32°F - 113 °F

0°C - 45°C

32°F - 113 °F

0°C - 45°C

Storage and

Transportation Temperature

-4°F - 158°F -4°F - 158°F -4°F - 158°F

Need help?

Do you have a question about the Cisco MERAKI MS120-8 Series and is the answer not in the manual?

Cisco MERAKI MS120-8 Series Specifications

General

Model	MS120-8
Ports	8
Uplink Ports	2 x 1G SFP
Power over Ethernet (PoE)	No
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
Layer	Layer 2
Form Factor	Desktop
Warranty	Lifetime
Power Supply	External
Operating Temperature	0°C to 40°C
Operating Humidity	10% to 90% non-condensing
Management	Cloud-managed
MAC Address Table Size	8, 000
Jumbo Frame Support	Yes, up to 9216 bytes
Storage Temperature	-20°C to 60°C
Humidity	5 to 95% non-condensing
Power Consumption	12W (max)