Overview of the Router 1-13
Equipment That You Must Provide
Equipment That You Must Provide
Figure 1-8 shows items that you will have to provide to install your router. You will require
only some of these items, depending on what Cisco 1600 model you are installing.
Figure 1-8 Items That You Provide
10BaseT Ethernet cable
Ethernet AUI transceiver
(If connecting to an AUI Ethernet)
WAN interface card
(Optional, might already
be installed)
Phillips screwdriver
(If installing a WAN interface card)
Ethernet 10BaseT hub
(If connecting to a 10BaseT Ethernet)
RJ-45-to-RJ-45 straight-through cable
(If installing a Cisco 1603 or Cisco 1604)
RJ-48S-to-RJ-48S cable
(If installing a Cisco 1602. An RJ-45-to-RJ-45
straight-through cable can substitute.)
Serial cable
(If installing a Cisco 1601, order this cable from Cisco.)
NT1 device
(If installing a Cisco 1603)
AUI
8
7
6
5
4
3
2
1
H10383
To Next Page
Loading...
