Cisco 1603R - Page 76

Cisco 1600 Series Router Hardware Installation Guide
Cable Pinouts
C-4
Table C-3 Straight-Through 10BaseT Cable (RJ-45 to RJ-45) Pinouts
The EIA/TIA-232 console port is configured as data terminal equipment (DTE) and uses
an RJ-45 connector. A console cable kit is provided with your router to connect a console
(an ASCII terminal or PC running terminal emulation software) to the console port. The
console cable kit contains an RJ-45-to-RJ-45 rollover cable and a RJ-45-to-DB-25 female
DTE adapter (labeled Terminal). Table C-4 lists the pinouts for the asynchronous serial
console port, the RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-25 female DTE
adapter.
RJ-45
Pin Signal Direction
RJ-45
Pin
1 TX+ —> 1
2 TX– —> 2
3 RX+ <— 3
4– – 4
5– – 5
6 RX– <— 6
7– – 7
8– – 8