Cisco 3251 - Page 12

Cisco Systems, Inc.
All contents are Copyright © 1992–2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 12 of 13
Physical Specifications
Dimensions and Weight Specifications
Card dimensions:
• MARC, SMIC, and FESMIC height: 0.937 in
Dimension includes component side height, board height, and shroud height on solder side.
• MARC, SMIC, and FESMIC width: 3.775 in.
• MARC, SMIC, and FESMIC depth: 3.550 in.
Weight:
• MARC: 3.3 oz (94g)
• SMIC and FESMIC: 3.4 oz (96g)
Easy IP Phase I X X
QoS
Generic traffic shaping X X
Class-Based Ethernet Matching and Mobile Access Routing (802.1p
CoS)
XX
Class-Based Weighted Fair Queuing X X
Committed Access Rate - X
Diffserv-compliant Weighted Random Early Detection (WRED) X X
Flow-based WRED X X
Low latency queuing X X
Priority queuing X X
Traffic Policing - X
Weighted Fair Queuing X X
Link Fragmentation and Interleaving (LFI) X X
Resource Reservation Protocol (RSVP) - X
Dial backup, dialer profiles, dialer idle time out X X
Dial on demand X X
Table 6 Cisco 3200 Mobile Access Router Software Feature Sets Protocols and Features Supported by
Cisco 3200 Mobile Access Router (Continued)
IP
IP PLUS (default
on Cisco 3220)